|
| |
TM 9-2320-364-20-5
21-202
21-39. SELF-RECOVERY WINCH (SRW) CONTAINER HANDLING UNIT (CHU) REAR
GUIDE REPLACEMENT (CONT).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealing compound to threads of screw
(10).
(2)
Install screw (10) and axle stop (11) on rear
guide (1).
Rear guide assembly weighs 70
lbs (32 kg). Attach suitable
lifting device to prevent possible
injury to personnel.
(3)
Attach lifting device to rear guide (1).
(4)
With the aid of an assistant, position rear
guide (1) on frame (9) with two lockwashers
(8) and screws (7).
(5)
Install screw (6), washer (5) and locknut (4)
on rear guide (1).
(6)
With the aid of an assistant, position four
locknuts (2) and screws (3) on rear guide (1).
(7)
With the aid of an assistant, tighten two
screws (7) on rear guide (1).
(8)
With the aid of an assistant, tighten four
locknuts (2) on rear guide (1).
(9)
Remove lifting device from rear guide (1).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
1
2
3
4
8
9
10
11
7
6
5
1
|
