|
| |
TM 9-2320-364-20-5
21-224
21-45. CONTAINER HANDLING UNIT (CHU) FRONT CROSSMEMBER ASSEMBLY
REPLACEMENT (CONT).
b.
Installation.
Front crossmember assembly
weighs approximately 500 (227
kg). Attach suitable lifting device
to prevent possible injury to
personnel.
(1)
Attach lifting device to front crossmember
assembly (1).
(2)
With the aid of an assistant, position front
crossmember assembly (1) on left front
support bracket (5) and right front support
bracket (4).
(3)
Install front crossmember assembly (1) to
front support brackets (5) and (4) with 18
screws (3) and locknuts (2).
(4)
Remove lifting device from front
crossmember assembly (1).
c.
Follow-on Maintenance:
Install auxiliary fuel tank (if equipped), (Para 4-9).
Install deck weldment, (Para 21-40).
Install CHU stow cone weldment, (Para 21-44).
Install CHU air cylinders and rotary paddles, (Para 21-43).
Install CHU air valves, (Para 21-42).
Install CHU air lines, (Para 12-36).
Install bumper weldment, (Para 21-41).
Remove wheel chocks, (TM 9–2320–364–10).
END OF TASK
1
2
4
5
3
|
