|
| |
TM 9-2320-364-20-5
22-5
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound on threads of
screw (13).
(2)
Install sleeve spacer (16) in cross tube (17).
(3)
Position machine gun ring rear support (4)
on power module right frame (12) with
sleeve spacer (16), six spring washers (15),
sleeve (14) and screw (13).
(4)
Apply sealing compound on threads of
screw (11).
(5)
Install screw (11), sleeve (10), six spring
washers (9), spacer (8), washer (7),
lockwasher (6) and nut (5) on power
module right frame (12). Tighten to 170
lb-ft (230 N.m).
(6)
Tighten screw (13) to 128 lb-ft (174 N.m).
(7)
Install machine gun ring mount (3) on
machine gun ring rear support (4) with four
screws (2) and locknuts (1).
c.
Follow-On Maintenance:
Install machine gun ring, (Para 22-2).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
