|
| |
TM 9-2320-364-20-5
22-12
22-6. MACHINE GUN HATCH RING REPLACEMENT (CONT).
b.
Installation.
NOTE
Gaskets do not come preformed.
Five gasket strips must be cut in
the following lengths:
34 in. - two strips.
24 in. - one strip.
14 in. - one strip.
24-1/2 in. - one strip.
(1)
Cut gasket (5) strips to correct lengths.
(2)
Install gasket (5) strips, hatch ring
assembly (2), 34 sealing washers (4) and
screws (3) on cab roof (6). Tighten screws
to 204 lb-in (23 N.m).
(3)
Install hatch cover (1) on hatch ring
assembly (2).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
34 IN.
(86.36 CM)
34 IN.
(86.36 CM)
24 1/2 IN.
(62.23 CM)
14 IN.
(35.56 CM)
24 IN.
(60.96 CM)
|
