|
| |
TM 9-2320-364-20-5
23-3
b.
Installation.
NOTE
During installation, ensure face of
gage is aligned properly.
(1)
Position air pressure indicator (6) in air dash
panel assembly (4).
(2)
Install air pressure indicator mounting
bracket (14), two lockwashers (13) and
nuts (12) on rear of air pressure indicator (6).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(3)
Apply sealing compound to threads of air
pressure indicator studs (11).
NOTE
Install elbows as noted during
removal.
(4)
Install two elbows (10) on air pressure
indicator studs (11).
(5)
Apply sealing compound to threads of two
elbows (10).
(6)
Install two adapters (9) on elbows (10).
(7)
Install air line 2641 (7) and air line 2610 (8)
on two adapters (9).
(8)
Install light socket (5) on rear of air pressure
indicator (6).
(9)
Install two screws (1) on air dash panel
assembly (4).
(10)
Install sunshield (2) on dash (3) and air
dash panel assembly (4) with eight screws
(1).
|
