|
| |
TM 9-2320–364–24P
1
UNIT, DIRECT SUPPORT AND
GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
1. SCOPE.
This RPSTL lists and authorizes spares and repair parts; special tools; special Test, Measurement, and Diagnostic
Equipment (TMDE); and other special support equipment required for performance of Unit, Direct Support, and
General Support Maintenance of the M1074/M1075 Palletized Load System (PLS). It authorizes the requisitioning,
issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenance, and
recoverability (SMR) codes.
2. GENERAL.
In addition to Section I, Introduction, this Repair Parts and Special Tools List (RPSTL) is divided into the following
sections:
c.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the authorized
parts. Parts Lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each
group listed in ascending figure and item number sequence. Bulk materials are listed by item name in FIG BULK at
the end of the section. Repair parts kits or sets are listed separately in their own functional group within Section II.
Repair parts for repairable special tools are also listed in the section.
c.
Section III. Special Tools List. A list of special tools, special Test, Measurement and Diagnostic Equipment
(TMDE), and other special support equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI)
information in DESCRIPTION AND USABLE ON CODE (UOC) column) for the performance of maintenance.
c.
Section IV. Cross-Reference Indexes. A list, in National Item Identification Number (NIIN) sequence, of
all National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part
numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration
figure and item number appearance.
3. EXPLANATION OF COLUMNS (SECTIONS II AND III).
a.
Item No. (Column (1)). Indicates the number used to identify items called out in the illustration.
b.
SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction,
as shown in the following breakout:
|
