|
| |
TM 9-2320-364-34-2
12-23
d.
Assembly.
NOTE
Ensure sockets are installed as
noted prior to removal.
(1)
Position intergear link (1) in soft jawed vise.
NOTE
Do not perform Steps (2) and (3)
if socket is lube for life.
(2)
Install grease fitting (7) on socket (3).
(3)
Install dust boot (2) on socket (3).
(4)
Install socket (3) on intergear link (1).
(5)
Install screw (5) and locknut (4) on
clamp (6). Tighten locknut to 50 to 60 lb-ft
(68 to 81 N.m).
(6)
Repeat Steps (2) through (5) for remaining
socket (3).
|
