|
| |
TM 9-2320-364-34-2
12-59
Steering gear weighs 190 lbs (86 kg). Ensure steering gear is properly supported upon
removal from truck. Failure to comply may result in severe injury to personnel.
Front steering gear needs to be supported on transmission jack with two wooden blocks
located in front of front steering gear. Wooden blocks should be 4 by 6 by 11 in. and
2 by 4 by 11 in. and should be positioned as shown. Failure to comply may result in
steering gear falling from transmission jack and causing injury to personnel.
(7)
Position transmission jack and two wooden
blocks under front steering gear (7).
(8)
Secure front steering gear (7) to
transmission jack with chains.
(9)
With the aid of an assistant, remove two
locknuts (17) and screws (18) from front
steering gear (7). Discard locknuts.
(10)
With the aid of an assistant, remove two
locknuts (19), screw (20), screw (21) and
washer (22) from bracket (23). Discard
locknuts.
NOTE
Intergear link end is removed
from pitman arm as forward
steering gear is removed from
truck.
(11)
With the aid of an assistant, remove front
steering gear (7) and bracket (23) from
frame and remove intergear link end (13)
from pitman arm (12).
(12)
Lower jack to floor and remove chains
from front steering gear (7).
|
