|
| |
TM 9-2320-364-34-2
12-82
12-12. EMERGENCY STEERING PUMP REPLACEMENT (CONT).
(5)
Apply hydraulic oil to preformed
packing (10).
(6)
Install preformed packing (10) and elbow (9)
in emergency steering pump (3) and tighten
nut (8).
(7)
Apply hydraulic oil to preformed
packing (7).
(8)
Install preformed packing (7) and elbow (6)
in emergency steering pump (3) and tighten
nut (5).
Adhesives, solvents and sealing
compounds can burn easily, and give
off harmful vapors and are harmful to
skin and clothing. To avoid injury or
death, keep away from open fire and
use in well-ventilated area. If
adhesive, solvent or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(9)
Coat face of emergency steering pump (3)
with sealing compound.
(10)
Coat threads of screws (1) with sealing
compound.
(11)
With the aid of an assistant, install
emergency steering pump (3) on transfer
case (4) with two washers (2) and screws (1).
c.
Follow-On Maintenance:
Install emergency steering valve,
(TM 9-2320-364-20).
Install emergency steering pump hoses,
(TM 9-2320-364-20).
Install driveshaft between transfer case and
Axle No. 3, (TM 9-2320-364-20).
Fill steering reservoir, (TM 9-2320-364-20).
Start engine and check for oil leaks, (TM 9-2320-364-10).
Check level of steering reservoir, (TM 9-2320-364-20).
LHS in transit position, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
