|
| |
TM 9-2320-364-34-2
3-63
a.
Removal.
NOTE
Tag and mark wires, hoses and lines prior to removal.
Right and left cylinder heads are removed the same way. Right cylinder head shown.
(1)
Remove two screws (1) and washers (2) from cylinder head (3).
(2)
Remove wire harness (4) from cylinder head (3).
(3)
Remove two screws (5), lockwashers (6) and
clip (7) from cylinder head (3). Discard
lockwashers.
NOTE
Perform Step (4) for right side only.
(4)
Remove hose 2628 (8) from fitting (9).
(5)
Remove screw (10) and lockwasher (11)
from right lifting bracket (12). Discard
lockwasher.
(6)
Remove right lifting bracket (12) from
cylinder head (3).
|
