|
| |
TM 9-2320-364-34-2
3-76
3-7. CYLINDER HEAD ASSEMBLY REPLACEMENT (CONT).
(45)
Connect breather tube (15) with hose (18)
and tighten clamp (17).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and
water.
(46)
Apply sealing compound to threads of
screw (10).
(47)
Position right lifting bracket (12) on cylinder
head (3) with one lockwasher (11) and
screw (10).
(48)
Apply coat of sealing compound to threads
of screws (5).
(49)
Install lockwashers (6) and two screws (5) in
clip (7) and install clip on cylinder head (3).
Tighten screws (5) and (10) to 60 lb-ft
(81 N.m).
NOTE
Perform Step (50) for right side
only.
(50)
Install hose 2628 (8) on fitting (9).
|
