|
| |
TM 9-2320-364-34-2
3-109
(5)
Position guide studs in end of crankshaft (6).
(6)
Install seal expander on guide studs.
Do not lubricate Teflon seal lip or
outside diameter of crankshaft
before seal installation. Teflon
lip seals must be installed dry to
allow transfer of Teflon to
crankshaft for proper sealing.
(7)
Position seal (1) on seal expander.
(8)
Slide seal (1) over seal expander and onto
crankshaft (6).
(9)
Remove seal expander and guide studs from
crankshaft (6).
(10)
Position guide studs in end of crankshaft
(6).
(11)
Position seal installer and J-3154-1 handle
on guide studs.
(12)
Drive seal (1) with seal installer until seal
seats in flywheel housing (4).
(13)
Remove seal installer and guide studs from
end of crankshaft.
|
