|
| |
TM 9-2320-364-34-2
3-131
(6)
Position engine lifting bracket (5) on front
balance cover (6) with lockwashers (3)
and (4) and screws (2) and (1).
(7)
Tighten screw (1) on engine lifting
bracket (5) to 71 to 75 lb-ft (96 to 102 N.m)
(8)
Tighten screw (2) on engine lifting
bracket (5) to 53 to 56 lb-ft (72 to 76 N.m).
(9)
Tighten screw (1) on engine lifting
bracket (5) to 137 to 147 lb-ft
(186 to 199 N.m).
(10)
Tighten screw (2) on engine lifting
bracket (5) to 71 to 75 lb-ft
(96 to 102 N.m).
c.
Follow-On Maintenance:
Adjust Timing and Synchronous Reference Sensor (TRS/SRS), (DDEC II, Para 6-10) or
(DDEC III, Para 6-11).
Install cab engine access panel, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
