|
| |
TM 9-2320-364-34-2
3-142
3-23. ENGINE OIL BREATHER AND HOSES REPLACEMENT (CONT).
(2)
Remove two screws (4) and washers (5) from
breather elbow (6).
(3)
Remove breather elbow (6) and gasket (7)
from left cylinder head (8). Discard gasket.
(4)
Remove hose (2) and two clamps (1) from
breather tube (9).
(5)
Remove locknut (10), screw (11) and
cushion clip (12) from bracket (13).
Discard locknut.
(6)
Remove two screws (14) and
lockwashers (15) from breather tube (16).
Discard lockwashers.
(7)
Remove breather tube (16) and gasket (17)
from right cylinder head (18). Discard
gasket.
(8)
Remove hose (3) and two clamps (1) from
breather tube (16).
NOTE
Perform Steps (9) and (10) only if
breather tube is damaged.
(9)
Measure and record height of breather
tube (9) extending from engine block (19).
(10)
Remove breather tube (9) from engine
block (19).
|
