|
| |
TM 9-2320-364-34-2
3-146
3-24. ENGINE OIL FILLER TUBE REPLACEMENT (CONT).
(6)
Remove locknut (13), screw (14) and clamp (15) from bracket (16). Discard locknut.
(7)
Remove clamp (15) from filler hose 2999 (12).
(8)
Remove filler hose 2999 (12) from elbow (17).
(9)
Remove two screws (18), lockwashers (19), washers (20) and bracket (21) from engine block (22).
Discard lockwashers.
NOTE
Mark position of elbow prior to removal.
(10)
Remove elbow (17) from engine block (22).
b.
Installation.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(1)
Apply sealing compound to threads of elbow (17).
NOTE
Install elbow in same position as noted during removal.
(2)
Install elbow (17) in engine block (22).
(3)
Install bracket (21) on engine block (22) with two washers (20), lockwashers (19) and screws (18).
(4)
Position filler hose 2999 (12) on elbow (17).
(5)
Position clamp (15) on filler hose 2999 (12).
(6)
Install clamp (15) on bracket (16) with screw (14) and locknut (13).
|
