|
| |
TM 9-2320-364-34-2
3-149
(5)
Remove filler neck (2) from adapter (11).
NOTE
Some engines do not have copper washers.
(6)
Remove adapter (11) and copper washer (12) from engine block (13). Discard copper washer.
b.
Installation.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Install cable ties as required.
(1)
Apply sealing compound to threads of adapter (11).
(2)
Install adapter (11) in engine block (13).
NOTE
Some engines did not have
copper washers. Copper washers
can be installed on all engines to
reduce oil seepage.
(3)
Position filler neck (2) and copper washer
(12) in adapter (11).
(4)
Position two clamps (5) and (9) on filler
neck (2).
(5)
Install clamp (9) on bracket (10) with
screw (8) and locknut (7).
(6)
Install clamp (5) on bracket (6) with
screw (4) and locknut (3).
(7)
Tighten filler neck (2) in adapter (11).
(8)
Install engine oil dipstick (1) in filler
neck (2).
|
