|
| |
TM 9-2320-364-34-2
3-161
b.
Installation.
(1)
Apply grease to mating surface of oil pump (4) and engine block (6).
(2)
Position gasket (8) on engine block (6) and gasket (7) on oil pump (4).
(3)
Position oil pressure relief valve (1) on oil pump (4) and engine block (6).
(4)
Position two lockwashers (3) and screws (5) in oil pressure relief valve (1) and engine block (6).
(5)
Position two lockwashers (3) and screws (2) in oil pressure relief valve (1) and oil pump (4).
(6)
Tighten four screws (2) in oil pressure relief valve (1) to 23 to 26 lb-ft (31 to 35 N.m).
c.
Follow-On Maintenance:
Install oil pan, (Para 3-22).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
