|
| |
TM 9-2320-364-34-2
3-169
Materials/Parts
Grease (Item 21, Appendix B)
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
Gasket (2) (Item 83, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Oil filter removed, (TM 9-2320-364-20)
Oil cooler removed, (Para 3-29)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Bit Set, Screwdriver (Item 17, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
3-30. ENGINE OIL COOLER ADAPTER REPLACEMENT.
Materials/Parts - Continued
Gasket (Item 112, Appendix E)
Gasket (Item 114, Appendix E)
Lockwasher (2) (Item 292, Appendix E)
Lockwasher (8) (Item 293, Appendix E)
Spring (Item 666, Appendix E)
Washer, Flat (Item 694, Appendix E)
a.
Removal.
(1)
Remove upper hose clamp (1) from oil cooler outlet elbow (2).
(2)
Remove hose clamp (3) and hose (4) from angle valve (5).
(3)
Remove oil cooler outlet elbow (2) from water pump (6).
(4)
Remove angle valve (5) from adapter (7).
(5)
Remove adapter (7) from oil cooler outlet elbow (2).
|
