|
| |
TM 9-2320-364-34-2
3-172
3-30. ENGINE OIL COOLER ADAPTER REPLACEMENT (CONT).
(2)
Apply grease to two gaskets (23).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(3)
Apply sealing compound to threads of three
screws (22).
(4)
Install spacers (24) and (25), gaskets (23)
and oil cooler adapter plate (21) on
engine (18) with three screws (22). Tighten
screws to 30 to 35 lb-ft (41 to 47 N.m).
(5)
Apply sealing compound to three
screws (19).
(6)
Install three washers (20) and screws (19) in
oil cooler adapter plate (21). Tighten screws
to 30 to 35 lb-ft (41 to 47 N.m).
(7)
Position gasket (17) and oil cooler adapter
cover (14) on engine (18) with eight
lockwashers (16) and screws (15).
|
