|
| |
TM 9-2320-364-34-2
3-186
3-33. SHIPPING CONTAINER, ENGINE ASSEMBLY
REPLACEMENT (CONT).
NOTE
Remove cable ties as required.
(11)
Remove screw (16) and screw (17) from
engine bracket (18).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(12)
Apply primer and sealing compound to the
threads of screw (16).
NOTE
Dipstick tube brackets and
dipstick tubes are cable tied to
engine for shipping.
(13)
Install bracket (19) on engine bracket (18)
with screw (16). Tighten screw to 23 to 26
lb-ft (31-35 N.m).
(14)
Apply primer and sealing compound to the
threads of screw (17).
(15)
Install hose (20) on bracket (19) and engine
bracket (18) with cushion clip (21) and
screw (17). Tighten screw 41 to 47 lb-ft
(56-64 N.m).
(16)
Install bracket (22), dipstick tube (23) and
cushion clip (24) on bracket (25) with
screw (26) and locknut (27).
|
