|
| |
TM 9-2320-364-34-2
4-4
4-2. FUEL INJECTOR REPAIR (CONT).
b.
Disassembly.
Do not reuse screws, load plate
or follower retainer. This may
cause damage to the solenoid or
screws.
(1)
Remove four screws (1), load plate (2)
follower retainer (3) and solenoid (4) from
spacer (5). Discard screws, load plate and
follower retainer.
(2)
Remove seal (6) from solenoid (4). Discard
seal.
NOTE
Tag and mark the spacer and
injector prior to removal. The
spacer is a matched component
and must stay with the same
injector.
(3)
Remove spacer (5) and seal (6) from
injector assembly (7). Discard seal.
1
2
3
4
6
5
6
7
|
