|
| |
TM 9-2320-364-34-2
4-19
Blower weighs 71 lbs (32 kg). Attach suitable lifting device prior to removal to prevent
possible injury to personnel.
Blower lobes turn freely. Ensure fingers, jewelry, and hair are kept clear of rotors in
blower. Failure to comply may result in severe injury to personnel.
(23)
Attach lifting device to blower (5).
Use extreme caution when
removing blower from engine.
Ensure oil pressure hose on
blower does not get damaged
upon removal.
(24)
Lift blower (5) up slightly.
(25)
Move blower (5) forward to remove blower
seal (46) from blower drive support (4).
(26)
Remove blower (5) and gasket (47) from
engine (12) and position on clean level
surface. Discard gasket.
(27)
Remove screw (44) and retainer (45) from
blower (5).
(28)
Remove lifting device from blower (5).
(29)
Remove and discard seal (46) from
clamp (6).
(30)
Position clean rags over engine (12) to
keep engine free of dirt and debris.
(31)
Remove three screws (48) and fuel
pump (49) from blower (5). Discard screws.
(32)
Remove and discard gasket (50) from fuel
pump (49) or blower (5).
(33)
Position rag over blower (5) to keep blower
free of dirt and debris.
|
