|
| |
TM 9-2320-364-34-2
5-2
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Cap and Plug Set (Item 26, Appendix F)
Jackstand (4) (Item 132, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Plywood Sheet (Appendix C)
This task covers:
a. Disassembly
c. Assembly
e. Follow-On Maintenance
b. Cleaning/Inspection
d. Testing
INITIAL SETUP
Materials/Parts
Cloth, Crocus (Item 12, Appendix B)
Sealing Compound (Item 53, Appendix B)
Gasket (2) (Item 57, Appendix E)
Lockwasher (120) (Item 293, Appendix E)
(Model A only)
Nut, Flanged Wiz Lock (120)
(Item 310, Appendix E) (Model B only)
Personnel Required
Two
Test Equipment
Adapter, Radiator (Item 6, Appendix F)
Tester, Pressure, Radiator
(Item 237, Appendix F)
5-2. RADIATOR ASSEMBLY REPAIR/TEST.
Equipment Condition
Coolant level sight glass removed,
(TM 9-2320-364-20)
Radiator removed, (TM 9-2320-364-20)
a.
Disassembly.
Failure to properly support radiator
as described in Step (1), will result
in damage to radiator.
NOTE
There are two types of
radiators. Model B replaced
Model A.
Model A uses standard
lockwashers for assembly.
Model B uses flanged wiz
locknuts for assembly.
Both models are disassembled and assembled the same way.
Model A discards lockwashers. Model B discards wiz locknuts and does not have
lockwashers.
Jackstands should be positioned at highest level for easier access to lower side of radiator.
(1)
Position radiator assembly (1) on 32 in. by 36 in. (81 by 91 cm) plywood sheet supported by four
jackstands.
|
