|
| |
TM 9-2320-364-34-2
5-6
5-2. RADIATOR ASSEMBLY REPAIR/TEST (CONT).
Bottom tank assembly weighs 82
lbs (37 kg). Ensure bottom tank
assembly is fully supported prior to
installation. Failure to comply
may result in injury to personnel or
damage to equipment.
(6)
With the aid of an assistant, position
gasket (8), bottom tank assembly (4) and two
bolt straps (9) on radiator assembly (1)
with 50 lockwashers (7), screws (6) and
nuts (5).
(7)
Position five lockwashers (3) and screws (2)
in right of bottom tank assembly (4).
(8)
Tighten 120 screws (2), (6), (10), (14), (17),
(20) and (24) to 17 to 21 lb-ft (23 to 28
N.m).
d.
Testing.
(1)
Install plug (1) and clamp (2) in bottom tank
assembly (3).
|
