|
| |
TM 9-2320-364-34-2
5-11
b.
Installation.
NOTE
Install cable ties as required.
(1)
Position screw (18) in cylinder head (20).
(2)
Coat both sides of gasket (19) with grease.
(3)
Install gasket (19) on thermostat
housing (9).
(4)
Position gasket (19) and thermostat
housing (9) on screw (18) against cylinder
head (20).
(5)
Install clip (12) on thermostat housing (9)
with lockwasher (11) and screw (10).
Tighten screw to 23 to 26 lb-ft (31 to 35
N.m).
(6)
Install two lockwashers (8) and screws (7)
thermostat housing (9). Tighten screws to
23 to 26 lb-ft (31 to 35 N.m).
(7)
Connect hose 3572 (5) on elbow (6).
(8)
Tighten screw (18) on cylinder head (20) to
35 to 38 lb-ft (47 to 52 N.m).
(9)
Install washer (16), screw (15),
lockwasher (14) and nut (13) in front timing
cover (17). Tighten nut to 30 to 35 lb-ft (41
to 47 N.m).
|
