|
| |
TM 9-2320-364-34-2
5-17
NOTE
Lower aftercooler straight down
and then tilt to allow outlet to
clear engine block.
(3)
Position aftercooler (6) on engine block (8)
with eight lock screws (7).
(4)
Position gasket (5), two clamps (1), hose (2)
and outlet elbow and tube (4) on
aftercooler (6).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(5)
Apply sealing compound to two screws (3).
(6)
Install two screws (3) in outlet elbow and
tube (4). Tighten screws to 156 to 204 lb-in
(18 to 23 N.m).
(7)
Tighten two clamps (1) on hose (2).
|
