| |
TM 9-2320-364-34-2
6-6
6-2. ALTERNATOR ASSEMBLY REPAIR (145 AMP) (CONT).
(17)
Remove nut (47) and screw (48) from
negative rectifier (37) and slip ring end
housing (20).
(18)
Remove screw (49), lockwasher (50),
washer (51), insulator (52) negative
rectifier (37), bushing (53) and two
bushings (54) from slip ring end
housing (20). Discard lockwasher.
(19)
Remove three nuts (55) and studs (15) from
brush housing (13).
(20)
Remove brush housing (13) and gasket (56)
from slip ring end housing (20). Discard
gasket.
NOTE
Perform Step (21) only if
bushing is damaged.
(21)
Remove bushing (57) from slip ring end
housing (20).
(22)
Position slip ring end housing (20) in press.
(23)
Remove bearing (58) from slip ring end
housing (20) and remove from press.
|