|
| |
TM 9-2320-364-34-2
6-11
d.
Assembly.
(1)
Position drive end housing (27) in press.
Apply pressure only on outer
portion of race when pressing
bearing into drive end housing, or
damage to equipment may result.
(2)
Press bearing (61) in drive end housing (27)
(3)
Install bearing retainer (60) in drive end
housing (27) with four screws (59).
NOTE
Threaded end of shaft must point
downward.
(4)
Install rotor assembly (32) in drive end
housing (27) and remove from press.
|
