|
| |
TM 9-2320-364-34-2
6-21
Ensure not to cut or rip wires
loose when disassembling
housing. Damage to equipment
may result.
NOTE
Tag and mark all wires prior
to removal.
Ensure all adhesive sealant
is removed from heat sink
and control box connectors
upon disassembly.
(12)
Remove screw (38), lockwasher (39) and
heat sink (34) from alternator housing (40).
Discard lockwasher.
(13)
Remove nine locknuts (41) from studs (42).
Discard locknuts.
(14)
Matchmark and remove end housing (43)
from alternator housing (40).
NOTE
Perform Step (15) if bearing is
damaged.
(15)
Remove bearing (44) from end housing
(43).
NOTE
Perform Step (16) if bushing is
damaged.
(16)
Remove bushing (45) from end housing
(43).
44
45
43
41
40
42
MATCHMARKS
40
34
39
38
|
