|
| |
TM 9-2320-364-34-2
6-27
d.
Assembly.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Coat threads of six studs (46) with sealing
compound.
(2)
Position front rotor (57) on shaft (50) and
install six washers (56) and locknuts (55).
Hold shaft and tighten locknuts to 45 lb-in
(5 Nm).
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
NOTE
Install retaining rings as noted
during removal.
(3)
Install bearing (54) and retaining rings (52)
and (53) in front housing (35).
52
35
53
|
