|
| |
TM 9-2320-364-34-2
6-75
(10)
Tap end of camshaft pulley (20) to take up
end play.
(11)
Insert grooved end of timing tool between
TRS/SRS (7) and double teeth (21) on pulse
wheel (22).
(12)
Loosen two screws (8) in bracket (9).
(13)
Loosen screw (11) in retaining clip (12) and
bracket (9).
NOTE
Ensure timing tool surface is
flush with double teeth and
TRS/SRS.
(14)
Move bracket (9) to align end of TRS/SRS
(7) with groove in timing tool.
(15)
Hold bracket (9) and tighten two socket
head screws (8).
(16)
Tighten screw (11) while pushing TRS/SRS
(7) toward pulse wheel (20).
(17)
Remove timing tool from pulse wheel (22).
(18)
Remove screw (16), washer (15), clamp (14)
and dial indicator from No. 1 right injector
bore (13).
|
