| |
TM 9-2320-364-34-2
6-84
6-12. ELECTRICAL PROPORTIONAL ANALOG CONTROL (EPAC) REPLACEMENT
AND ADJUSTMENT (CONT).
b.
Installation.
(1)
Install cap and chain (9), lockwasher (8) and
nut (7) on EPAC (3).
(2)
Install EPAC (3) on bracket (6) with three
screws (5) and locknuts (4).
(3)
Install connectors MC73 (2) and MC59 (1)
on EPAC (3).
c.
Adjustment.
(1)
Remove connector MC59 (1) from EPAC
terminal (2).
(2)
Remove two screws (3) and cable clamps (4)
from strain relief housing (5).
(3)
Remove strain relief housing (5) from
connector shell (6).
|