|
| |
TM 9-2320-364-34-2
6-89
a.
Removal.
Allow engine to cool before removing harness to avoid injury to personnel.
NOTE
Tag and mark all wire and connectors prior to removal.
Remove cable ties as required.
(1)
Remove locknut (1), screw (2) and cushion clip (3) from bracket (4). Discard locknut.
(2)
Remove engine wire harness (5) from cushion clip (3).
(3)
Disconnect MC118 connector (6).
(4)
Remove locknut (7) and shield wires (8) and (9) from stud (10). Discard locknut.
(5)
Disconnect MC11 connector (11) from bulkhead connector (12).
|
