|
| |
TM 9-2320-364-34-2
6-119
(6)
Disconnect connector (11) from oil temperature sensor (12).
(7)
Open clip (13) and remove DDEC III wire harness (14) from clip.
(8)
Open clip (15) and remove DDEC III wire
harness (14) from clip.
(9)
Disconnect connector (16) from oil pressure
sensor (17).
(10)
Remove DDEC III wire harness (14) from
engine (18).
b.
Installation.
NOTE
Evenly distribute any slack
in harness. Do not mark any
connections.
Install cable ties as required.
(1)
Position DDEC III wire harness (14) on
engine (18).
(2)
Connect connector (16) on oil pressure
sensor (17).
(3)
Install DDEC III wire harness (14) on clip
(15) and close clip.
14
12
11
13
16
14
18
17
15
|
