|
| |
TM 9-2320-364-34-2
6-137
(5)
Remove nut (39) from 12 volt load terminal
(42) of polarity protection control (43).
Install wire 240/241 (41), lockwasher (40)
and nut on 12 volt load terminal.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(6)
Apply electrical sealant to 12 volt load
terminal (42).
(7)
Install splash guard (37), four washers (36),
lockwashers (35) and screws (34) on
electric bracket (38).
39
40
43
42
41
34
37
38
36
35
|
