|
| |
TM 9-2320-364-34-2
6-158
6-19. CAB WIRE HARNESS REPLACEMENT (CONT).
b.
Installation.
Use extreme caution when
installing cab wire harness in
cab. Ensure assistant routes cab
wire harness wires away from all
remaining cab wires. Failure to
comply could result in damage to
wires and connectors.
NOTE
Install cable ties as required.
(2)
Position two screws (182) in engine harness MC21 connector (179) and position engine harness MC21
connector in cab (4).
(3)
Install two ground wires (181) and two locknuts (180) on two screws (182).
(4)
Connect bottom engine harness MC21 connector (179) and tighten center screw (178).
|
