|
| |
TM 9-2320-364-34-2
6-164
6-19. CAB WIRE HARNESS REPLACEMENT (CONT).
(32)
Connect beacon light MC28 connector (133).
(33)
Route wire 1153 (129) through grommet (132).
(34)
Route wire 1153 (129) through dome light
bracket (128) and install heat shrink and
connector on wire 1153 (129).
(35)
Connect dome light 1153 connector (130).
(36)
Install dome light cover (127) on dome light
bracket (128) with two screws (126).
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful to
skin and clothing. To avoid injury or
death, keep away from open fire and
use in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(37)
Apply sealing compound to dome light
wire (129) and grommet (132).
(38)
Close engine cover (131).
|
