|
| |
TM 9-2320-364-34-2
6-184
6-20. STE/ICE-R WIRE HARNESS REPLACEMENT (CONT).
(17)
Connect MC70 connector (13).
(18)
Install shield wires (10) and (11), wire 1435 (9), washer (8), lockwasher (7) and screw (6) on engine (12).
Adhesives, solvents, and sealing compounds can burn easily can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
(19)
Apply electrical sealant to screw (6).
(20)
Install MC65 connector (2), two screws (4) and locknuts (3) on mounting bracket (5).
(21)
Connect MC65 connector (2) and tighten screw (1).
c.
Follow-On Maintenance:
Install left front noise panel, (TM 9-2320-364-20).
Install left side noise panel, (TM 9-2320-364-20).
Install right side noise panel, (TM 9-2320-364-20).
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
