|
| |
TM 9-2320-364-34-2
6-201
(9)
Install shield wires (52) and (53), wire 1435 (51), washer (50), lockwasher (49) and screw (48) on
engine (54).
Adhesives, solvents, and sealing compounds can burn easily can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
(10)
Apply electrical sealant to screw (48).
(11)
Connect MC65 connector (47) and tighten screw (46).
(12)
Position STE/ICE-R chassis wire harness (40) in cushion clip (44).
(13)
Install two cushion clips (44), screws (43), lockwashers (42) and locknuts (41) on crossmember (45).
|
