|
| |
TM 9-2320-364-34-2
6-226
6-26. ATEC WIRE HARNESS REPLACEMENT (CONT).
(6)
Disconnect connectors MC50 (25)
and MC51 (26).
(7)
Remove ATEC wire harness (3)
from ECB (7).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Position ATEC wire harness (3) in
electronic control box (7).
(2)
Connect connectors MC51 (26)
and MC50 (25).
(3)
Install wire 225 (23) on circuit breaker CB11 (24).
|
