|
| |
TM 9-2320-364-34-2
6-255
Cushion clips may be installed under locknut or
under nuts and lockwashers. If mounted under
locknuts, do not remove nuts and lockwashers.
(34)
Remove two locknuts (81), cushion clips (82), nuts (83) and lockwashers (84) from screws (85). Discard
lockwashers and locknuts.
(35)
Remove chassis wire harness (15) from cushion clips (82).
(36)
Loosen screw (86) from MC3 connector (87) and remove MC3 connector from bulkhead connector (88).
(37)
Remove locknut (89), screw (90) and two shield wires (91) and (92) from bulkhead connector (88).
Discard locknut.
|
