|
| |
TM 9-2320-364-34-2
6-281
(61)
Install two shield wires (91) and (92), screw (90) and locknut (89) on bulkhead connector (88).
(62)
Connect MC3 connector (87) to bulkhead connector (88). Tighten screw (86).
(63)
Position chassis wire harness (15) in cushion clips (82).
NOTE
Nuts and lockwashers in Step (64) may not have been removed during disassembly.
(64)
Install two lockwashers (84), nuts (83), cushion clips (82) and locknuts (81) on screws (85).
|
