|
| |
TM 9-2320-364-34-2
6-286
6-29. CHASSIS WIRE HARNESS REPLACEMENT (CONT).
(93)
Position chassis wire harness (15) in cushion clip (27).
(94)
Install cushion clip (27), screw (26) and locknut (25) on bracket (28).
(95)
Position chassis wire harness (15) in cushion clip (23).
(96)
Install cushion clips (23), screw (22) and locknut (21) on bracket (24).
(97)
Connect connectors M10 (18) and M51 (19) to solenoid valves (20).
(98)
Tighten screws (17) on connectors M10 (18) and M51 (19).
NOTE
Perform Step (99) only if nuts on solenoid valves were loosened.
(99)
Tighten nuts (16) on solenoid valves (20).
|
