| |
TM 9-2320-364-34-2
6-320
6-32. LHS CAB INTERFACE WIRE HARNESS REPLACEMENT (CONT).
(6)
Remove six screws (11) from heater left side
panel (12).
(7)
Pull top of heater left side panel (12) toward
steering wheel (6).
NOTE
Perform Steps (8) and (9) if
equipped with LHS Controller
Protection Kit.
(8)
Disconnect wires 1755 (13) and 1755A (14)
from fuse holder (15).
(9)
Disconnect relay connector (16) from relay
(17).
NOTE
Disconnect connector by pulling
up on tabs and gently prying
apart connector.
(10)
Disconnect MC94 connector (18).
(11)
Disconnect MC93 connector (19).
(12)
Disconnect MC33 connector (20).
(13)
Remove cab interface wire harness
from truck.
b.
Installation.
NOTE
Evenly distribute any slack
in harness.
Install cable ties as required.
(1)
Position cab interface wire harness in truck.
(2)
Connect MC33 connector (20).
(3)
Connect MC93 connector (19).
(4)
Connect MC94 connector (18).
NOTE
Perform Steps (5) and (6) if
equipped with LHS Controller
Protection Kit.
(5)
Connect relay connector (16) to relay (17).
(6)
Connect wires 1755A (14) and 1755 (13) to
fuse holder (15).
14
17
13
15
16
|