|
| |
TM 9-2320-364-34-2
6-336
6-34. 24 VOLT TRAILER WIRE HARNESS REPLACEMENT (CONT).
NOTE
24 volt trailer harness is removed by pulling wires through slot in mounting bracket.
(44)
Remove four locknuts (87), screws (88), spring cover (89), 24 volt trailer connector (90) and two spacers
(91) from mounting bracket (92). Discard locknuts.
(45)
Remove 24 volt trailer wire harness (9) from truck.
b.
Installation.
NOTE
Install cable ties as required.
Evenly distribute any slack in harness.
(1)
Position 24 volt trailer wire harness (9) in truck.
NOTE
24 volt trailer harness connector is installed by pulling wires through slot in mounting
bracket.
(2)
Install 24 volt trailer connector (90) on mounting bracket (92) with four screws (88), locknuts (87), two
spacers (91) and spring cover (89).
87
9
90
89
88
92
91
|
