|
| |
TM 9-2320-364-34-2
6-356
(15)
Position MC10 connector (2) through ECB (15).
(16)
Install rubber grommet (14), plates (13) and four screws (12) on ECB (15).
(17)
Install clamp (11) on MC10 connector (2) with screw (10) and locknut (9).
(18)
Connect MC36 connector (8).
(19)
Install double braided ground wire (6) on
stud (7) with nut (3), lockwasher (4) and
two washers (5).
(20)
Connect MC10 connector (2) and tighten
screw (1).
c.
Follow-On Maintenance:
Install Electronic Control Box (ECB) top cover,
(TM 9-2320-364-20).
Install right side Electronic Control Box (ECB)
panel, (TM 9-2320-364-20).
Install left side noise panel, (TM 9-2320-364-20).
Connect batteries, (TM 9-2320-364-20).
Stow LHS, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
