|
| |
TM 9-2320-364-34-2
6-366
6-36. REVERSE POLARITY WIRING HARNESS REPLACEMENT (145 AMP) (CONT).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Position wire harness (5) in truck.
(2)
Pull wire harness (5) through hole (125) of battery box (126).
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result. Damage to equipment, injury or death to personnel
may occur.
(3)
Position screw (123), washer (122), cable 1137 (121), wire 1079 (120), wires 240/241 (119), washer
(118), lockwasher (117) and nut (116) on positive terminal (124).
While applying torque to nut, hold screw with wrench or damage to battery may occur.
(4)
Tighten nut (116) to 12 to 16 lb-ft (16-22 N.m).
|
