|
| |
TM 9-2320-364-34-2
6-377
Materials/Parts - Continued
Tags, Identification (Item 72, Appendix B)
Lockwasher (2) (Item 251, Appendix E)
Lockwasher (4) (Item 282, Appendix E)
Lockwasher (Item 283, Appendix E)
Lockwasher (Item 286, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (TM 9-2320-364-20)
Left side noise panel removed,
(TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Wrench, Torque, (0 to 60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m)
(Item 277, Appendix F)
6-37. POLARITY POWER WIRE HARNESS REPLACEMENT (200 AMP).
Materials/Parts
Cable Ties (Item 9, Appendix B)
Compound, Corrosion Preventive
(Item 15, Appendix B)
Rags, Wiping (Item 47, Appendix B)
Sealant, Electrical (Item 50, Appendix B)
Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber
gloves, and do not smoke when performing maintenance on batteries. Injury will result if
acid contacts skin or eyes. Wear rubber apron to prevent clothing being damaged.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may result. Damage to equipment, injury or death
to personnel may occur.
|
