|
| |
TM 9-2320-364-34-2
6-380
6-37. POLARITY POWER WIRE HARNESS REPLACEMENT (200 AMP) (CONT).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Position polarity power wire harness (20)
in truck.
(2)
Remove nut (33) from 12 volt battery
terminal (36) of polarity protection control
(32).
(3)
Install wire 1566 (35), lockwasher (34) and
nut (33) on 12 volt battery terminal (36).
(4)
Remove nut (28) from 24 volt battery
terminal (31) of polarity protection control
(32).
(5)
Install wire 1281A (30), lockwasher (29)
and nut (28) on 24 volt battery terminal
(31).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(6)
Apply electrical sealant to 24 volt battery
terminal (31) and 12 volt battery terminal
(36).
(7)
Install splash guard (26), four washers (25),
lockwashers (24) and screws (23) on
electric bracket (27).
34
36
32
28
31
33
35
20
30
29
|
