|
| |
TM 9-2320-364-34-2
6-404
6-38. POLARITY WIRE HARNESS REPLACEMENT (200 AMP) (CONT).
(3), lockwasher (2) and nut (1) on positive terminal (10).
While applying torque to locknut, hold screw with wrench or damage to battery may occur.
(54)
Tighten nut (1) to 12 to 16 lb-ft (16-22 N.m).
Corrosion compound contains
alkali. Do not get in eyes; wear
goggles/safety glasses when
using. Avoid contact with skin.
In case of contact, immediately
wash area with soap and water.
If eyes are contacted, flush eyes
with large amounts of water at
least 15 minutes and get
immediate medical attention.
(55)
Apply corrosion preventative compound to
positive terminal (10), positive terminal
(19), negative terminal (29) and negative
terminal (39).
c.
Follow-On Maintenance:
Install left side noise panel, (TM 9-2320-364-20).
Install cab engine access panel, (TM 9-2320-364-20).
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
10
39
19
9
6
7
8
10
3
2
5
4
1
29
|
